require 'devise/strategies/authenticatable' Warden::Manager.after_set_user except: :fetch do |user, warden| if user.session_active?(warden.cookies.signed['_session_id'] || warden.raw_session['auth_id']) session_id = warden.cookies.signed['_session_id'] || warden.raw_session['auth_id'] else session_id = user.activate_session(warden.request) end warden.cookies.signed['_session_id'] = { value: session_id, expires: 1.year.from_now, httponly: true, secure: (Rails.env.production? || ENV['LOCAL_HTTPS'] == 'true'), same_site: :lax, } end Warden::Manager.after_fetch do |user, warden| if user.session_active?(warden.cookies.signed['_session_id'] || warden.raw_session['auth_id']) warden.cookies.signed['_session_id'] = { value: warden.cookies.signed['_session_id'] || warden.raw_session['auth_id'], expires: 1.year.from_now, httponly: true, secure: (Rails.env.production? || ENV['LOCAL_HTTPS'] == 'true'), same_site: :lax, } else warden.logout throw :warden, message: :unauthenticated end end Warden::Manager.before_logout do |_, warden| SessionActivation.deactivate warden.cookies.signed['_session_id'] warden.cookies.delete('_session_id') end module Devise mattr_accessor :pam_authentication @@pam_authentication = false mattr_accessor :pam_controlled_service @@pam_controlled_service = nil mattr_accessor :check_at_sign @@check_at_sign = false mattr_accessor :ldap_authentication @@ldap_authentication = false mattr_accessor :ldap_host @@ldap_host = nil mattr_accessor :ldap_port @@ldap_port = nil mattr_accessor :ldap_method @@ldap_method = nil mattr_accessor :ldap_base @@ldap_base = nil mattr_accessor :ldap_uid @@ldap_uid = nil mattr_accessor :ldap_mail @@ldap_mail = nil mattr_accessor :ldap_bind_dn @@ldap_bind_dn = nil mattr_accessor :ldap_password @@ldap_password = nil mattr_accessor :ldap_tls_no_verify @@ldap_tls_no_verify = false mattr_accessor :ldap_search_filter @@ldap_search_filter = nil mattr_accessor :ldap_uid_conversion_enabled @@ldap_uid_conversion_enabled = false mattr_accessor :ldap_uid_conversion_search @@ldap_uid_conversion_search = nil mattr_accessor :ldap_uid_conversion_replace @@ldap_uid_conversion_replace = nil module Strategies class PamAuthenticatable def valid? super && ::Devise.pam_authentication end end class SessionActivationRememberable < Authenticatable def valid? @session_cookie = nil session_cookie.present? end def authenticate! resource = SessionActivation.find_by(session_id: session_cookie)&.user unless resource cookies.delete('_session_id') return pass end if validate(resource) success!(resource) end end private def session_cookie @session_cookie ||= cookies.signed['_session_id'] end end end end Warden::Strategies.add(:session_activation_rememberable, Devise::Strategies::SessionActivationRememberable) Devise.setup do |config| config.warden do |manager| manager.default_strategies(scope: :user).unshift :two_factor_ldap_authenticatable if Devise.ldap_authentication manager.default_strategies(scope: :user).unshift :two_factor_pam_authenticatable if Devise.pam_authentication manager.default_strategies(scope: :user).unshift :session_activation_rememberable manager.default_strategies(scope: :user).unshift :two_factor_authenticatable manager.default_strategies(scope: :user).unshift :two_factor_backupable end # The secret key used by Devise. Devise uses this key to generate # random tokens. Changing this key will render invalid all existing # confirmation, reset password and unlock tokens in the database. # Devise will use the `secret_key_base` on Rails 4+ applications as its `secret_key` # by default. You can change it below and use your own secret key. # config.secret_key = '2f86974c4dd7735170fd70fbf399f7a477ffd635ef240d07a22cf4bd7cd13dbae17c4383a2996d0c1e79a991ec18a91a17424c53e4771adb75a8b21904bd1403' # ==> Mailer Configuration # Configure the e-mail address which will be shown in Devise::Mailer, # note that it will be overwritten if you use your own mailer class # with default "from" parameter. # config.mailer_sender = ENV['SMTP_FROM_ADDRESS'] || 'notifications@localhost' # Configure the class responsible to send e-mails. config.mailer = 'UserMailer' # ==> ORM configuration # Load and configure the ORM. Supports :active_record (default) and # :mongoid (bson_ext recommended) by default. Other ORMs may be # available as additional gems. require 'devise/orm/active_record' # ==> Configuration for any authentication mechanism # Configure which keys are used when authenticating a user. The default is # just :email. You can configure it to use [:username, :subdomain], so for # authenticating a user, both parameters are required. Remember that those # parameters are used only when authenticating and not when retrieving from # session. If you need permissions, you should implement that in a before filter. # You can also supply a hash where the value is a boolean determining whether # or not authentication should be aborted when the value is not present. # config.authentication_keys = [:email] # Configure parameters from the request object used for authentication. Each entry # given should be a request method and it will automatically be passed to the # find_for_authentication method and considered in your model lookup. For instance, # if you set :request_keys to [:subdomain], :subdomain will be used on authentication. # The same considerations mentioned for authentication_keys also apply to request_keys. # config.request_keys = [] # Configure which authentication keys should be case-insensitive. # These keys will be downcased upon creating or modifying a user and when used # to authenticate or find a user. Default is :email. config.case_insensitive_keys = [:email] # Configure which authentication keys should have whitespace stripped. # These keys will have whitespace before and after removed upon creating or # modifying a user and when used to authenticate or find a user. Default is :email. config.strip_whitespace_keys = [:email] # Tell if authentication through request.params is enabled. True by default. # It can be set to an array that will enable params authentication only for the # given strategies, for example, `config.params_authenticatable = [:database]` will # enable it only for database (email + password) authentication. # config.params_authenticatable = true # Tell if authentication through HTTP Auth is enabled. False by default. # It can be set to an array that will enable http authentication only for the # given strategies, for example, `config.http_authenticatable = [:database]` will # enable it only for database authentication. The supported strategies are: # :database = Support basic authentication with authentication key + password config.http_authenticatable = [:pam, :database] # If 401 status code should be returned for AJAX requests. True by default. # config.http_authenticatable_on_xhr = true # The realm used in Http Basic Authentication. 'Application' by default. # config.http_authentication_realm = 'Application' # It will change confirmation, password recovery and other workflows # to behave the same regardless if the e-mail provided was right or wrong. # Does not affect registerable. # See : https://github.com/plataformatec/devise/wiki/How-To:-Using-paranoid-mode,-avoid-user-enumeration-on-registerable config.paranoid = true # By default Devise will store the user in session. You can skip storage for # particular strategies by setting this option. # Notice that if you are skipping storage for all authentication paths, you # may want to disable generating routes to Devise's sessions controller by # passing skip: :sessions to `devise_for` in your config/routes.rb config.skip_session_storage = [:http_auth] # By default, Devise cleans up the CSRF token on authentication to # avoid CSRF token fixation attacks. This means that, when using AJAX # requests for sign in and sign up, you need to get a new CSRF token # from the server. You can disable this option at your own risk. # config.clean_up_csrf_token_on_authentication = true # ==> Configuration for :database_authenticatable # For bcrypt, this is the cost for hashing the password and defaults to 10. If # using other encryptors, it sets how many times you want the password re-encrypted. # # Limiting the stretches to just one in testing will increase the performance of # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use # a value less than 10 in other environments. Note that, for bcrypt (the default # encryptor), the cost increases exponentially with the number of stretches (e.g. # a value of 20 is already extremely slow: approx. 60 seconds for 1 calculation). config.stretches = Rails.env.test? ? 1 : 10 # Setup a pepper to generate the encrypted password. # config.pepper = '104d16705f794923e77c5e5167b52452d00646dc952a2d30b541c24086e647012c7b9625f253c51912e455981e503446772973d5f1638631196c819d7137fad4' # Send a notification to the original email when the user's email is changed. config.send_email_changed_notification = true # Send a notification email when the user's password is changed config.send_password_change_notification = true # ==> Configuration for :confirmable # A period that the user is allowed to access the website even without # confirming their account. For instance, if set to 2.days, the user will be # able to access the website for two days without confirming their account, # access will be blocked just in the third day. Default is 0.days, meaning # the user cannot access the website without confirming their account. # config.allow_unconfirmed_access_for = 2.days # A period that the user is allowed to confirm their account before their # token becomes invalid. For example, if set to 3.days, the user can confirm # their account within 3 days after the mail was sent, but on the fourth day # their account can't be confirmed with the token any more. # Default is nil, meaning there is no restriction on how long a user can take # before confirming their account. config.confirm_within = 2.days # If true, requires any email changes to be confirmed (exactly the same way as # initial account confirmation) to be applied. Requires additional unconfirmed_email # db field (see migrations). Until confirmed, new email is stored in # unconfirmed_email column, and copied to email column on successful confirmation. config.reconfirmable = true # Defines which key will be used when confirming an account # config.confirmation_keys = [:email] # ==> Configuration for :rememberable # The time the user will be remembered without asking for credentials again. config.remember_for = 1.year # Invalidates all the remember me tokens when the user signs out. config.expire_all_remember_me_on_sign_out = true # If true, extends the user's remember period when remembered via cookie. # config.extend_remember_period = false # Options to be passed to the created cookie. For instance, you can set # secure: true in order to force SSL only cookies. config.rememberable_options = { secure: true } # ==> Configuration for :validatable # Range for password length. config.password_length = 8..72 # Email regex used to validate email formats. It simply asserts that # one (and only one) @ exists in the given string. This is mainly # to give user feedback and not to assert the e-mail validity. # config.email_regexp = /\A[^@]+@[^@]+\z/ # ==> Configuration for :timeoutable # The time you want to timeout the user session without activity. After this # time the user will be asked for credentials again. Default is 30 minutes. # config.timeout_in = 30.minutes # ==> Configuration for :lockable # Defines which strategy will be used to lock an account. # :failed_attempts = Locks an account after a number of failed attempts to sign in. # :none = No lock strategy. You should handle locking by yourself. # config.lock_strategy = :failed_attempts # Defines which key will be used when locking and unlocking an account # config.unlock_keys = [:email] # Defines which strategy will be used to unlock an account. # :email = Sends an unlock link to the user email # :time = Re-enables login after a certain amount of time (see :unlock_in below) # :both = Enables both strategies # :none = No unlock strategy. You should handle unlocking by yourself. # config.unlock_strategy = :both # Number of authentication tries before locking an account if lock_strategy # is failed attempts. # config.maximum_attempts = 20 # Time interval to unlock the account if :time is enabled as unlock_strategy. # config.unlock_in = 1.hour # Warn on the last attempt before the account is locked. # config.last_attempt_warning = true # ==> Configuration for :recoverable # # Defines which key will be used when recovering the password for an account # config.reset_password_keys = [:email] # Time interval you can reset your password with a reset password key. # Don't put a too small interval or your users won't have the time to # change their passwords. config.reset_password_within = 6.hours # When set to false, does not sign a user in automatically after their password is # reset. Defaults to true, so a user is signed in automatically after a reset. config.sign_in_after_reset_password = false # ==> Configuration for :encryptable # Allow you to use another encryption algorithm besides bcrypt (default). You can use # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1, # :authlogic_sha512 (then you should set stretches above to 20 for default behavior) # and :restful_authentication_sha1 (then you should set stretches to 10, and copy # REST_AUTH_SITE_KEY to pepper). # # Require the `devise-encryptable` gem when using anything other than bcrypt # config.encryptor = :sha512 # ==> Scopes configuration # Turn scoped views on. Before rendering "sessions/new", it will first check for # "users/sessions/new". It's turned off by default because it's slower if you # are using only default views. # config.scoped_views = false # Configure the default scope given to Warden. By default it's the first # devise role declared in your routes (usually :user). # config.default_scope = :user # Set this configuration to false if you want /users/sign_out to sign out # only the current scope. By default, Devise signs out all scopes. # config.sign_out_all_scopes = true # ==> Navigation configuration # Lists the formats that should be treated as navigational. Formats like # :html, should redirect to the sign in page when the user does not have # access, but formats like :xml or :json, should return 401. # # If you have any extra navigational formats, like :iphone or :mobile, you # should add them to the navigational formats lists. # # The "*/*" below is required to match Internet Explorer requests. # config.navigational_formats = ['*/*', :html] # The default HTTP method used to sign out a resource. Default is :delete. config.sign_out_via = :delete # ==> OmniAuth # Add a new OmniAuth provider. Check the wiki for more information on setting # up on your models and hooks. # config.omniauth :github, 'APP_ID', 'APP_SECRET', scope: 'user,public_repo' # ==> Warden configuration # If you want to use other strategies, that are not supported by Devise, or # change the failure app, you can configure them inside the config.warden block. # # config.warden do |manager| # manager.intercept_401 = false # manager.default_strategies(scope: :user).unshift :some_external_strategy # end # ==> Mountable engine configurations # When using Devise inside an engine, let's call it `MyEngine`, and this engine # is mountable, there are some extra configurations to be taken into account. # The following options are available, assuming the engine is mounted as: # # mount MyEngine, at: '/my_engine' # # The router that invoked `devise_for`, in the example above, would be: # config.router_name = :my_engine # # When using OmniAuth, Devise cannot automatically set OmniAuth path, # so you need to do it manually. For the users scope, it would be: # config.omniauth_path_prefix = '/my_engine/users/auth' if ENV['PAM_ENABLED'] == 'true' config.pam_authentication = true config.usernamefield = nil config.emailfield = 'email' config.check_at_sign = true config.pam_default_suffix = ENV.fetch('PAM_EMAIL_DOMAIN') { ENV['LOCAL_DOMAIN'] } config.pam_default_service = ENV.fetch('PAM_DEFAULT_SERVICE') { 'rpam' } config.pam_controlled_service = ENV.fetch('PAM_CONTROLLED_SERVICE') { nil } end if ENV['LDAP_ENABLED'] == 'true' config.ldap_authentication = true config.check_at_sign = true config.ldap_host = ENV.fetch('LDAP_HOST', 'localhost') config.ldap_port = ENV.fetch('LDAP_PORT', 389).to_i config.ldap_method = ENV.fetch('LDAP_METHOD', :simple_tls).to_sym config.ldap_base = ENV.fetch('LDAP_BASE') config.ldap_bind_dn = ENV.fetch('LDAP_BIND_DN') config.ldap_password = ENV.fetch('LDAP_PASSWORD') config.ldap_uid = ENV.fetch('LDAP_UID', 'cn') config.ldap_mail = ENV.fetch('LDAP_MAIL', 'mail') config.ldap_tls_no_verify = ENV['LDAP_TLS_NO_VERIFY'] == 'true' config.ldap_search_filter = ENV.fetch('LDAP_SEARCH_FILTER', '(|(%{uid}=%{email})(%{mail}=%{email}))') config.ldap_uid_conversion_enabled = ENV['LDAP_UID_CONVERSION_ENABLED'] == 'true' config.ldap_uid_conversion_search = ENV.fetch('LDAP_UID_CONVERSION_SEARCH', '.,- ') config.ldap_uid_conversion_replace = ENV.fetch('LDAP_UID_CONVERSION_REPLACE', '_') end end